2019 Bobcat® Excavators E55
- Year 2019
- Make Bobcat®
- Model Excavators
2019 Bobcat® Excavators E55
Bobcat E55 Compact ExcavatorThe Bobcat® E55 compact excavator (mini excavator) is a conventional tail swing model with exceptional performance, dig depth and dump height. The conventional tail swing makes it easier to move your machine through tight spaces such as doors, gates, and onto trailers. The Tier 4-compliant E55 is available with clamp-ready extendable-arm configuration that provides additional length when fully extended. Gain ultimate reach without having to upsize the machine.
Features may include:
Powerful Hydraulics- Bobcat compact excavators deliver more hydraulic horsepower than other brands of the same size. More power means more performance under load. This performance advantage is easily measured in increased slew torque, faster cycle times and maximum auxiliary hydraulic performance. The end result is more work per hour in the toughest conditions and increased attachment performance.
- Activate the hydraulic pins at the press of a switch; retract for attachment removal or extend for attachment hook up. Hydraulic X-Change maintains optimal “pin-on” bucket geometry so arm and bucket forces are not compromised.
- As needed, the arm can be hydraulically extended up to 30 in., and then retracted to its standard position for maximum arm force and lift performance. The extendable arm cylinder is powered by the primary auxiliary circuit, and a paddle on the right-hand joystick controls the extension and retraction of the arm.
- Many Bobcat® compact excavators are equipped with selectable auxiliary hydraulics. Three flow rates help you optimize the response of hydraulic attachments such as PowerTilt® and Hydra-Tilt™ swing accessories, clamps, grapples, hydraulic breakers and auger attachments. Select low flow for precise control, medium flow for placing or handling materials, or maximum flow for peak hydraulic attachment performance.
- It provides simultaneous up/down and angle adjustment, up to 25 degrees left or right. The Bobcat bolt-on replaceable cutting edge that is easy to rotate and simple to replace, providing lower operating costs.
- Easily change between “excavator” and “backhoe” patterns. No keys are required.
- Auto Idle makes it easier – and quieter – to pause your work, take a quick break or communicate on the jobsite. You’ll save fuel too. When machine functions aren’t used for more than four seconds, the machine automatically idles the engine until work resumes. When you move the joystick controls or initiate travel, the excavator automatically returns to the previously set throttle position. Auto idle can be enabled or disabled as needed.
- Auto-Shift travel shifts the machine out of high range and back automatically, offering superb travel performance without having to manually downshift. It automatically transitions the travel motors to and from high range, giving you greater tractive effort with no manual shifting. Simply select the travel speed range and go. A directional lug track also provides a smoother ride and less vibration when traveling.
Engine
Emissions
Tier (EPA): Tier 4
Governor RPM
Maximum: 2,200 rpm
Engine Power
49.8 hp
Fuel System
Fuel Type
Diesel
Operational
Operating Speed
Travel High/Low: 3.1 mph/1.9 mph
Operating Conditions
Arm Digging Force: 5,751 lbf | Bucket Digging Force: 8,977 lbf
Hydraulics
Hydraulic Flow
Auxiliary Std: 20 gal/min
Hydraulic Pump
Auxiliary Pressure: 3,045 psi
Dimensions
Dimensions
Lift Radius: 118 in | Boom Swing Left/Right: 75°/50° | Maximum Reach at Ground Level: 20 ft
Depth, Maximum
Dig: 12.9 ft
Height
100 in | Max Dump: 13.6 ft | with Operator Cab: 100 in
Length
206.4 in
Overall Length
in Travel Position: 206.4 in
Width
77.2 in
Capacities
Hitch Lift Capacity
Rated: 4999 lb
Fuel Capacity
Tank: 21.1 gal
Weights
Weight, In Running Order
12,004 lb
Weight
Class: 5.6 t
Features
Features
Tail Swing Type: Conventional